top of page
Search

How to choose the ideal office chair?

2 days ago
3 min read

The average office worker spends six to eight hours a day at a desk. That's why an office chair is not an ordinary item in the inventory, but equipment that directly affects back health, concentration and productivity. A wrongly chosen chair leads to pain in the back, neck and shoulders, and a well-chosen office chair prevents this.

In this guide, we explain what you should pay attention to before buying. The advice relies on recommendations from occupational safety organizations such as OSHA and CCOHS .

1. Adjustable seat height

This is the basic setting. The height is good when the feet are flat on the floor and the knees are bent at about a 90 degree angle. If your desk is at a fixed height, you can use a footrest to correct the position of your feet. For more detailed instructions, seethe CCOHS Office Chair Adjustment Guide .

2. Lumbar support that follows the curve of the spine

The spine has a natural curve in the lower back. A good ergonomic chair has a backrest that follows that curve and provides it with support. OSHA recommends a height-adjustable lumbar support so that the backrest fits the hollow of the lower back. A fixed support does not suit anyone perfectly, so in offices where the chair is used by several people, it is worth looking for adjustability.

3. Seat depth

This option is often overlooked by customers, and it is very important. Too deep a seat puts pressure on the back of the knees, and too little doesn't give enough support to the thighs. OSHA recommends a chair with both height and seat depth adjustment. As a general rule, there should be a gap of several fingers between the edge of the seat and the back of the knee.

4. Adjustable armrest

The armrest should relax the shoulders, and the elbows should stay close to the body. If the backrest is too high or too wide, the shoulders rise and the neck suffers. Choose a chair with height adjustment, and ideally also the width of the backrest.

5. Back rest and reclining mechanism

A high-quality backrest provides support while you move and change position. The mechanism with adjustable resistance and the ability to lock allows the chair to follow your body. Long-term sitting in the same position is tiring, and a chair that allows micro-movements alleviates this.

6. Material: mesh, fabric or leather

• Mesh: breathable, that's why it's a good choice for the warmer months and the climate in Podgorica.

• Fabric: comfortable and pleasant to the touch, but requires more regular maintenance.

• Leather and eco-leather: elegant and typical of executive offices, but less breathable.

7. Wheels, stand and load capacity

The five-arm stand provides stability. The castors should match the floor: softer ones are chosen for parquet and tiles, harder ones for carpet. Check the maximum load capacity of the chair, especially if it is intended for intensive daily use.

Quick check before buying

1. Can you adjust everything while sitting?

2. Are your feet flat on the floor and your knees at an angle of about 90°?

3. Does the backrest follow the lower back?

4. Is there a gap between the seat and the knees?

5. Arms relaxed and shoulders slumped?

6. Is the chair comfortable even after 15 minutes of trial sitting?

It is recommended that you always try the chair before buying, because the measurements and feeling of comfort depend on the height and build of each user.

Conclusion

The ideal office chair is one that adapts to you, not you to it. Pay attention to the height, lumbar support, seat depth and armrests, and be sure to try the chair. Investing in a quality chair pays off many times over through the health and productivity of employees.


 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page